Introducing GEPRC's take on the best budget stack out there on the market!

GEPRC TAKER F405 BLS 50A STACK is a plug-and-play stack system specially designed for DJI Air Unit. With the STM32F405 chip, ICM42688-P gyroscope, 16M black box and GEP-BLS50A-4IN1 ESC, you can enjoy a smooth and effortless user experience. This stack system connects to the DJI Air Unit with no soldering required, plus the upgraded Type-C USB connector increases the lifespan of the socket and reduces the risk of poor contact. The 9V 2.5A + 5V 3A dual independent BEC ensures a reliable power supply for any external device you might need.

Check out all our 30x30 stacks & combos, as well as the rest of our GEPRC selection.

Features

• Use mainstream STM32F405 chip
• Equipped with the latest 42688-P gyroscope
• 16M black box storage
• Integrated LC filter
• Upgrade type-C USB interface
• Directly plugged into the DJI Air Unit
• With GEP-BLS50A-4IN1 ESC, the flying feel is silky
• A simple and reasonable installation method, the shock absorber can make the gyroscope work very stably
• 9V 2.5A + 5V 3A dual independent BEC

Specifications

GEP-F405-HD V2 Flight Controller

• MCU: STM32F405
• IMU: ICM42688-P(SPI)
• Air Unit Connection: Direct plugging into DJI Air Unit
• Black Box: 16M onboard
• USB Connector: Type-C
• OSD: BetaFlight OSD w/ AT7456E chip
• BEC: 5V,9V dual BEC
• Firmware Target: GEPRCF405
• Size: 36.8×36.8mm, hole 30.5×30.5mm，φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle.
• Input Voltage: 3-6S LiPo
• UART: 6
• Power Filter: Integrated LC filter
• Weight: 7.7g

GEP-BLS50A-4IN1 ESC

• Input Voltage: 3-6S Lipo
• Galvanometer: Support
• Continuous Current: 50A
• Burst Current: 55A（5s）
• Support Protocol: Oneshot125/Oneshot42/Mulishot modes/Dshot 150/300/600
• Size: 42.9×39.7mm, hole30.5×30.5mm，φ4mm hole becomes φ3mm after using the silicone shock-absorbing circle.
• Weight:13.7g
• Target: G_H_30

Includes

• 1x Flight Controller
  
• 1x ESC
  
• 1x Capacitor
  
• 1x DJI Air Unit Adapter Cable
  
• 1x Flight Controller Adapter Cable
  
• 1x XT60 Power cable
  
• 4x M3x30 Screws
  
• 4x M3x24 Screws
  
• 8x Nylon nuts
  
• 8x Silicone grommets
  
• 2x sh1.0 4pinsilicone cable
  
• 1x Camera connection cable