iFlight BLITZ Mini M10 GPS & Compass V2

Features

• Using the latest UBLOX M10 chip, lower power consumption, faster satellite search speed.
  
• Built-in high precision compass QMC5883L.
  
• Built-in Faraday capacitor, with 1-10Hz positioning update rate, which makes GPS have faster startup speed and satellite receiving speed.
• 18x18mm ceramic antenna provides the best balance and performance for current GPS modules, low power consumption, strong signal and light weight.
• On-board LNA low noise amplifier and RF filter provide excellent working environment for GPS module.
  
• Up to 10HZ refresh rate.
  
• Built-in Flash, users can set GPS parameters by themselves using U-center or other software, configuration modification will be stored to Flash, no loss of parameters after power failure.

Pin Definitions 

• VCC: system main power supply, supply voltage is 5V, current is about 40mA when working
• GND: Ground
• RXD: data input
• TXD: Data output
• SDA: Serial Data - I2C Master/Slave Data
• DCL: Serial Clock - I2C Master/Slave Clock

Light Indicator

• Blue light, TX light, the blue light blinks on power up, indicating that there is data output.
  

• Red light, PPS light, not positioned red light is not lit, 3D positioning, the red light began to flash

Specifications 

• Compass module: QMC5883L
  
• Baud Rate: 4800bps-115200bps (Default - 115200bps)
  
• Sensitivity: Tracking: -167dBm
  
• Cold start: 26s
  
• Hot start: 1s
  
• Maximum height: 50000m
  
• Maximum speed: 500 m/s
  
• Speed accuracy: 0.05 m/s
  
• Maximum acceleration: ≦ 4G
  
• Refresh Rate: 10 Hz
  
• GPS patch antenna size: 18x18 mm
  
• Total dimensions: 20 x 21 x 6.5 mm
  
• Weight: 5.2 g（±0.5g）
  
• Input Voltage: 3.3-5.5 V, current 40mA
  
• GPS pin definition: RX/TX UART
  
• Compass pin definition: SDA/SLA

Includes

• 1x iFlight BLITZ M10 GPS & Compass (10th Gen)
• 1x Cable Set