HappyModel BNF Mobula8 HD 85mm Whoop (without DJI O3 Air Unit) - ELRS 2.4GHz

PRE-ORDER
HappyModel BNF Mobula8 HD 85mm Whoop (without DJI O3 Air Unit) - ELRS 2.4GHz at WREKD Co.
HappyModel BNF Mobula8 HD 85mm Whoop (without DJI O3 Air Unit) - ELRS 2.4GHz at WREKD Co.
HappyModel BNF Mobula8 HD 85mm Whoop (without DJI O3 Air Unit) - ELRS 2.4GHz at WREKD Co.
HappyModel BNF Mobula8 HD 85mm Whoop (without DJI O3 Air Unit) - ELRS 2.4GHz at WREKD Co.
SAVE 5% OFF YOUR FIRST ORDER
Use discount code FIRSTLEGENDS at checkout.

EXCLUSIVE DISCOUNTS AVAILABLE
Military, First Responders & Students
Learn More

HappyModel BNF Mobula8 HD 85mm Whoop (without DJI O3 Air Unit) - ELRS 2.4GHz

PRE-ORDER
/
  • PRE-ORDER
Ask us a question

Items in the same order as this item, may be delayed.

NOTE: This item is on pre-order, which means it will ship very soon. This typically ranges from 3 to 7 days.

(PRE-ORDER) HappyModel BNF Mobula8 HD 85mm Whoop (without DJI O3 Air Unit) - ELRS 2.4GHz

$94.99

Earn 94 CaveCoin by purchasing this item.

or Sign Up to start earning on your next order.

About this item

Please note that this version is a kit and AP! does NOT come with an O3 air unit, O3 camera and SanDisk Card.

Experience powerful performance with the HappyModel BNF Mobula8 1-2S HD 85mm! This amazing quadcopter comes with Crazy F405 ELRS HD flight controller, EX1103 11000Kv motors, and Gemfan Hurricane 2023 tri-blade propellers for superior power performance. 

Be sure to check out all our pre-built quads, and all our Happymodel products!

Specifications

  • Item Name: Mobula8 1-2S 85mm Micro FPV whoop drone
  • Size: 120mmx120mmx50mm
  • Brand Name: Happymodel
  • Wheelbase: 85mm

FLIGHT CONTROLLER

  • Built-in voltage meter sensor, voltage meter scale 110
  • Built-in current meter sensor, current meter scale 470
  • MCU: STM32F405RGT6 (168MHZ, 1Mbyte FLASH)
  • Power supply: 1-2S battery input (DC 2.9V-8.7V)
  • GYRO Sensor: BMI270  (SPI connection)
  • Built-in 12A(each) Blheli_S 4in1 ESC
  • Mount hole size: 25.5mm x 25.5mm
  • Built-in Serial ExpressLRS 2.4G
  • Model: Crazy F405 ELRS HD
  • Built-in BMP280 Barometer
  • Built-in 8MBp black box

ONBOARD UART ELRS 2.4GHZ RECEIVER

  • Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
  • Could update firmware via ExpressLRS configurator
  • Antenna: enameled copper wire 31mm length
  • Default firmware version: ExpressLRS V3.0.1
  • Firmware target: HappyModel EP 2400 RX
  • Telemetry output Power: <12dBm
  • RF Frequency: 2.4GHz

ONBOARD 4-IN-1 ESC

  • Current: 12A continuous peak 15A (3 seconds)
  • Factory firmware: Bluejay ESC V0.19
  • Support BLHeli_S Bluejay firmware
  • Power supply: 1-2S LiPo/LiPo HV
  • Default protocol: DSHOT300
  • Firmware target: Z-H-30

MOTORS

  • Motor Dimension(Dia.xLen):Φ13.5mmx15.5mm
  • Mode: EX1103 11000Kv
  • Shaft Diameter:Φ1.5mm
  • No.of Cells(Lipo):1-2S
  • Configu-ration:9N12P
  • Stator Diamter:11mm
  • Stator Length:3mm
  • Weight(g):3.8g

PROPELLERS

  • Center Hole Dia:1.5mm
  • Center Thickness:5mm
  • Props Dia:52.17mm
  • Weight:0.88g
  • Pitch:2.3inch
  • Material: PC

Includes

  • 1x HappyModel BNF Mobula8 1-2S HD 85mm w/ DJI O3 Air Unit & Micro Cam - ELRS 2.4GHz

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
Pilots also recommend these...
More from Happymodel
More from HappyModel
HappyModel 2.4GHz EP1 RX ELRS Receiver at WREKD Co.
HappyModel 2.4GHz EP1 RX ELRS Receiver
HappyModel V4 75mm Whoop Frame For Moblite7 / Mobula7 / Mobula7 1S - Choose Color at WREKD Co.
HappyModel V4 75mm Whoop Frame For Moblite7 / Mobula7 / Mobula7 1S - Choose Color
HappyModel 2.4GHz EP1 TCXO RX ELRS Receiver at WREKD Co.
HappyModel 2.4GHz EP1 TCXO RX ELRS Receiver
HappyModel 24RX40 2.4GHz RC Antenna For ELRS and TBS Tracer - U.FL at WREKD Co.
HappyModel 24RX40 2.4GHz RC Antenna For ELRS and TBS Tracer - U.FL
HappyModel X12 2S AIO Whoop Flight Controller (F4 FC / 12A 4in1 ESC / 25-400mW VTX) - Choose Version at WREKD Co.
HappyModel X12 2S AIO Whoop Flight Controller (F4 FC / 12A 4in1 ESC / 25-400mW VTX) - Choose Version
Recently viewed
Back to HappyModel