HappyModel Diamond 1S F4 AIO Flight Controller w/ 5A 8Bit 4in1 ESC & 400mW VTX - ELRS SPI

COMING SOON
HappyModel Diamond 1S F4 AIO Flight Controller w/ 5A 8Bit 4in1 ESC & 400mW VTX - ELRS SPI at WREKD Co.
HappyModel Diamond 1S F4 AIO Flight Controller w/ 5A 8Bit 4in1 ESC & 400mW VTX - ELRS SPI at WREKD Co.
HappyModel Diamond 1S F4 AIO Flight Controller w/ 5A 8Bit 4in1 ESC & 400mW VTX - ELRS SPI at WREKD Co.
HappyModel Diamond 1S F4 AIO Flight Controller w/ 5A 8Bit 4in1 ESC & 400mW VTX - ELRS SPI at WREKD Co.
SAVE 5% OFF YOUR FIRST ORDER
Use discount code FIRSTLEGENDS at checkout.

EXCLUSIVE DISCOUNTS AVAILABLE
Military, First Responders & Students
Learn More

HappyModel Diamond 1S F4 AIO Flight Controller w/ 5A 8Bit 4in1 ESC & 400mW VTX - ELRS SPI

COMING SOON
/
Ask us a question
NOTE: This item is on pre-order, which means it will ship very soon. This typically ranges from 3 to 7 days.

HappyModel Diamond 1S F4 AIO Flight Controller w/ 5A 8Bit 4in1 ESC & 400mW VTX - ELRS SPI

$61.99

Earn 61 CaveCoin by purchasing this item.

or Sign Up to start earning on your next order.

About this item

This 5-in-1 flight controller is inspired by Happymodel's Official Pilot - Angry Don FPV! The Happymodel Diamond F4 AIO 5-IN-1 Flight controller has a built-in VTX, ESC, OSD, and receiver - all on one triangle-shaped whoop board!

The 3 corners fit 25.5mm whoop mounting spacing.

Features

  • Diamond Mounting Pattern - 22.2x22.2x32.7mm 
  • Built-in 5A Blheli_S 4in1 ESC, Dshot600 ready
  • Built-in Betaflight OSD (SPI Control)
  • Built-in 25-400mW 5.8GHz VTX
  • Built-in SPI ELRS Receiver
  • Built-in 5V/1A BEC

Specifications

Flight controller

  • DiamondF4 ELRS FC Firmware target: CrazybeeF4SX1280
  • MCU: STM32F411CEU6 (100MHZ, 512K FLASH)
  • Gyro: ICM42688P 
  • Original whoop size compatible
  • Power supply: 1S battery input (DC 2.9V-4.35V)
  • Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
  • Built-in Betaflight OSD(SPI Control)
  • Built-in 5.8G VTX
  • Built-in SPI ELRS
  • Built-in 5V 1A BEC

Onboard 4in1 ESC

  • Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)
  • Factory firmware: O_H_5_REV16_8.HEX
  • Support BLHeliSuite programmable
  • MCU upgraded to EFM8BB21
  • Default protocol: DSHOT600

SPI ELRS V2.0 RECEIVER

  • Packet Rate option: 50Hz/150Hz/250Hz/500Hz
  • Compatibility: ExpressLRS V2.0 TX Module
  • Antenna: Enameled copper wire antenna
  • ExpressLRS Firmware version: V2.0
  • Receiver protocol: SPI ExpressLRS
  • Telemetry output Power: <12dBm
  • RF Frequency: 2.4GHz

Onboard 5.8g VTX

  • Transmitting Power: 0/RCE/25mw/100mw/400mw
  • Current (5v): <650ma (400mw)
  • Firmware version: OPENVTX
  • Power supply: DC 5V
  • RCE Mode support
  • PIT Mode support
  • Smart audio v2.1
  • Channels: 48ch

Cannot flash ExpressLRS firmware separately. 

Includes

  • 1x HappyModel Diamond 1S F4 AIO Flight Controller w/ 5A 8Bit 4in1 ESC & 400mW VTX - ELRS SPI
  • 2x Connecting Wire
  • 4x Damping Balls
  • 4x Screws

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
Pilots also recommend these...
More from Happymodel
More from HappyModel
HappyModel 2.4GHz EP1 RX ELRS Receiver at WREKD Co.
HappyModel 2.4GHz EP1 RX ELRS Receiver
HappyModel V4 75mm Whoop Frame For Moblite7 / Mobula7 / Mobula7 1S - Choose Color at WREKD Co.
HappyModel V4 75mm Whoop Frame For Moblite7 / Mobula7 / Mobula7 1S - Choose Color
HappyModel 2.4GHz EP1 TCXO RX ELRS Receiver at WREKD Co.
HappyModel 2.4GHz EP1 TCXO RX ELRS Receiver
HappyModel 24RX40 2.4GHz RC Antenna For ELRS and TBS Tracer - U.FL at WREKD Co.
HappyModel 24RX40 2.4GHz RC Antenna For ELRS and TBS Tracer - U.FL
HappyModel X12 2S AIO Whoop Flight Controller (F4 FC / 12A 4in1 ESC / 25-400mW VTX) - Choose Version at WREKD Co.
HappyModel X12 2S AIO Whoop Flight Controller (F4 FC / 12A 4in1 ESC / 25-400mW VTX) - Choose Version
Recently viewed
Back to HappyModel