Features

• New appearance design, strengthening carbon plate, hollow design, injection protection frame, noise reduction design, flight safety, silent.
  
• Adopts the GEP F722-45A AIO V2 high performance flight controller.
• For O3 camera design independent under hanging shock absorption gimbal, to solve the camera IMU resonance issues, to achieve the optimal anti-shake effect.
  
• SPEEDX2 2105.5 motor with HQ DT90 propeller, stable power output, and smooth flight feel.
  
• Through the Propeller Guard to access the memory card and USB ports to O3 Air Unit for easy data reading
• Power cable using XT60E1-M plug and carbon plate integrated design, convenient application.
  
• Battery installation method using a tie with 7075 aluminum parts fixed, solid and stable.
  
• Carefully tuned 3.5-inch HD cinematic FPV quad with flexible and delicate flight feeling.
• Pre-Installed with a GEP-M10 GPS

Specifications

• Model: Cinelog35 V2 HD O3
  
• Frame: GEP-CL35 V2
  
• Wheelbase: 142mm
  
• Gimbal plate: 2.0mm
  
• Top plate: 3.5mm
  
• Bottom plate: 1.5mm
  
• FC system: GEP-F722-45A AIO V2
  
• MCU: STM32F722RET6
  
• Gyro: ICM 42688-P
  
• OSD: Betaflight OSD w/AT7456E chip
  
• ESC: 8Bit 45A
  
• VTX: O3 Air Unit
  
• Camera: DJI O3
  
• Antenna: 5.8G & 2.4G
  
• Motor: SPEEDX2 2105.5-2650KV (6S)
  
• Propeller: HQProp D-T90MM
  
• GPS: GEP-M10
  
• Weight: 285.8g
  
• Receiver: PNP / ELRS 2.4GHz / CRSF
• Recommended battery: LiPo 1050mah-1300mah
• Flight time: 5′00″ - 8′ 30″

Includes

• 1x GEPRC BNF CineLog35 V2 HD 6S 3.5" Cinewhoop w/ DJI O3 Air Unit & Micro Cam - Choose Your Receiver (GPS)
• 1x L-shaped screwdriver (1.5mm)
• 1x Naked GoPro Mounting Base
• 1x L-shaped screwdriver (2mm)
• 1x L-shaped screwdriver (3mm)
• 2x HQProp D-T90MM（2 pairs）
• 2x M20x250mm battery strap
• 1x Antenna fixed tube (pair)
• 1x Antenna Mounting Base
• 1x GoPro Mounting Base
• 2x Battery Silicone Pads
• 1x Plastic Tweezers
• 1x Hardware Set
• 1x M5 wrench
• 1x Keychain