RadioMaster RP1 V2 2.4GHz ELRS Nano Receiver

COMING SOON
RadioMaster RP1 V2 2.4GHz ELRS Nano Receiver at WREKD Co.
RadioMaster RP1 V2 2.4GHz ELRS Nano Receiver at WREKD Co.
RadioMaster RP1 V2 2.4GHz ELRS Nano Receiver at WREKD Co.
RadioMaster RP1 V2 2.4GHz ELRS Nano Receiver at WREKD Co.
RadioMaster RP1 V2 2.4GHz ELRS Nano Receiver at WREKD Co.
RadioMaster RP1 V2 2.4GHz ELRS Nano Receiver at WREKD Co.
RadioMaster RP1 V2 2.4GHz ELRS Nano Receiver at WREKD Co.
RadioMaster RP1 V2 2.4GHz ELRS Nano Receiver at WREKD Co.
SAVE 5% OFF YOUR FIRST ORDER
Use discount code FIRSTLEGENDS at checkout.

EXCLUSIVE DISCOUNTS AVAILABLE
Military, First Responders & Students
Learn More

RadioMaster RP1 V2 2.4GHz ELRS Nano Receiver

COMING SOON
/
Ask us a question
NOTE: This item is on backorder, which means it will be delivered as soon as we receive our next shipment from our supplier. This typically ranges from 1 to 3 weeks.

Earn 72 CaveCoin by purchasing this item.

or Sign Up to start earning on your next order.

About this item

Note: The packaging in this product will mention V2, however the software is confirmed ELRS V3.

The Nano receivers, developed by Jye Smith of ExpressLRS, have ESP8285 MCU and SX1280 RF chip. RP1 has a UFL antenna socket while RP2 has a built-in ceramic antenna, making it super light and small. Both have WIFI built in, allowing you to upgrade firmware and configure the Receiver via WebUI. Both RP1 and RP2 have low-latency, high-refresh-rate RF module, making them ideal for FPV and long-range. Furthermore, their ultra-light Nano size allows you to fit them anywhere, from whoops to fixed-wing models. The EP1 comes with ELRS Firmware V3 pre-installed and a TCXO oscillator for solid connection & reliability.

Check out the RP2 if that fits your needs more!

Check out the rest of our RC receivers and all our RC transmitters, modules, and accessories!

Features

  • TCXO oscillator for solid connection & reliability.
  • Improved PCB design is better for heat dissipation.
  • ELRS Firmware V3 (pre-installed)
  • LED on the top side of PCB.
  • Solder pads are improved and easier to solder to.
  • Open-source receiver based on ExpressLRS
  • Upgraded rigid antenna with greater durability and performance




Specifications

  • Item: RP1 Nano ExpressLRS 2.4ghz Receiver
  • Type: ISM
  • Antenna: 65mm 2.4ghz T Antenna
  • Maximum receive refresh rate: 500Hz / F1000Hz
  • Minimum receiver refresh rate: 25Hz
  • Working voltage: 5v
  • Weight: 2.2g (Including antenna)
  • Dimension: 13mmx11mmx3mm
  • Firmware Version: ExpressLRS v3.0 pre-installed
  • FW Target: RadioMaster RP1/2 2400 RX
  • Bus interface: CRSF

User Manual

Includes

  • 1x RadioMaster RP1 V2 2.4GHz ELRS Nano Receiver
  • 1x 65mm UFL 2.4Ghz T Antenna
  • 1x User Manual

    This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

    Customer Reviews

    Based on 2 reviews
    100%
    (2)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    N
    N.R.
    Best receiver

    In my opinion if you have elrs and radiomaster, why not buy the receiver that’s made by the same company. Easiest setup of any receiver. Don’t even have to really update it either

    S
    Shane

    Amazing product and Amazing store

    Pilots also recommend these...
    More from RADIOMASTER
    More from Receivers, Parts and Accessories
    Foxeer ELRS Lite 2.4G Receiver - SMD Ceramic Antenna at WREKD Co.
    Foxeer ELRS Lite 2.4G Receiver - SMD Ceramic Antenna
    HappyModel 2.4GHz EP1 RX ELRS Receiver at WREKD Co.
    HappyModel 2.4GHz EP1 RX ELRS Receiver
    RadioMaster RP1 V2 2.4GHz ELRS Nano Receiver at WREKD Co.
    RadioMaster RP1 V2 2.4GHz ELRS Nano Receiver
    BetaFPV ELRS Lite 2.4GHz Receiver - Choose Version at WREKD Co.
    BetaFPV ELRS Lite 2.4GHz Receiver - Choose Version
    RadioMaster RP2 V2 2.4GHz ELRS Nano Receiver - Ceramic Antenna at WREKD Co.
    RadioMaster RP2 V2 2.4GHz ELRS Nano Receiver - Ceramic Antenna
    Recently viewed
    Back to Receivers, Parts and Accessories